LITOKOL K17 GREY 20KG
ADHESIVE
Normal cementitious adhesive for the laying of ceramic tiles indoors on floors and walls and
outdoors on floors. Product with ultra-low volatile organic compound (VOC) emissions.
TECHNICAL FEATURES
Colour: Grey (K17)
Mix ratio:
Water = 4.8 litres of water per 20 kg bag
Mix curing time: 5 minutes
Mix consistency: Creamy mortar
Mixture life: Approx. 8 hours
Application: Notched trowel
Maximum application thickness: 5 mm
Application temperatures allowed: From +5°C to +35°C
Open time (EN1346): ≥ 0,5 N/mm2 after 20 minutes
Waiting time for grouting:
Walls: 6 - 8 hours - Floor: 24 hours
Set to light foot traffic: 24 hours
Ready for use: 7 days
Temperature of use: From -30°C to +80°C
How to clean equipment:
With water when product is fresh.
Mechanically when product has hardened.
Consumption:
6 mm trowel: 2.5 kg/m2
8 mm trowel: 3 kg/m2
10 mm trowel: 4 kg/m2
Back-buttering: 5 kg/m2
Storage:
12 months in original packaging in a dry place.
Packaging: 20 kg bags
LITOKOL K18 WHITE 20KG
ADHESIVE
Normal cementitious adhesive for the laying of ceramic tiles indoors on floors and walls and
outdoors on floors. Product with ultra-low volatile organic compound (VOC) emissions.
TECHNICAL FEATURES
Colour: White (K18)
Mix ratio:
Water = 4.8 litres of water per 20 kg bag
Mix curing time: 5 minutes
Mix consistency: Creamy mortar
Mixture life: Approx. 8 hours
Application: Notched trowel
Maximum application thickness: 5 mm
Application temperatures allowed: From +5°C to +35°C
Open time (EN1346): ≥ 0,5 N/mm2 after 20 minutes
Waiting time for grouting:
Walls: 6 - 8 hours - Floor: 24 hours
Set to light foot traffic: 24 hours
Ready for use: 7 days
Temperature of use: From -30°C to +80°C
How to clean equipment:
With water when product is fresh.
Mechanically when product has hardened.
Consumption:
6 mm trowel: 2.5 kg/m2
8 mm trowel: 3 kg/m2
10 mm trowel: 4 kg/m2
Back-buttering: 5 kg/m2
Storage:
12 months in original packaging in a dry place.
Packaging: 20 kg bags
LITOLASTIC EVO 5KG
ADHESIVE
High-performance, white, two-component reactive adhesive for laying floors and walls indoors and outdoors of any
type of ceramic tile, including reinforced thin slabs, mosaics, natural and reconstituted stone even on non-traditional
substrates, such as wood, metal and fibreglass. Suitable for installations over existing tiles, on heated floors and in
swimming pools. Product with ultra-low volatile organic compound (VOC) emissions.
TECHNICAL FEATURES
Colour: Component A: white
Component B: clear straw-coloured
Mix ratio: Part A 92.6 parts by weight
Part B 7.4 parts by weight
Mixture life: About 1 hour at T=+23°C
Application temperatures allowed: From +10°C to +30°C
Open time (EN1346): ≥ 0,5 N/mm2 after 50 minutes
Bonding time: Approx. 1 hour
Cleaning of equipment and residues: With water and Scotch-
Brite™ pad on wet product. Once hardened, mechanical
cleaning only
Consumption:
Mosaics and small formats:
2 mm trowel: 1.1 kg/m2 - 3.5 mm trowel: 1.8 kg/m2
Normal formats with sides ≤60 cm:
8 mm trowel: 3 kg/m2 - 10 mm trowel: 3.5 kg/m2
Large formats with sides > 60 cm:
Back-buttering 5 kg/m2
Set to light foot traffic: Approx. 24 hours at T=+23°C
Ready for use: 7 days
Waiting time for grouting: Approx. 24 hours
Storage:
24 months in original packaging. Avoid freezing temperatures
Packaging: 5-10 kg buckets.
LITOPLUS K55 20KG
ADHESIVE
Superwhite cementitious adhesive, enhanced performance, with no vertical slip and extended open time for
the laying of ceramic tiles and mosaics indoors and outdoors on floors and walls. Suitable for swimming
pools, overlaying and heated floors. Product with ultra-low volatile organic compound (VOC) emissions.
TECHNICAL FEATURES
Colour: White
Mix ratio:
Water = 7 litres of water per 20 kg bag
Mix curing time: 5 minutes
Mix consistency: Creamy thixotropic mortar
Mixture life: Approx. 8 hours
Application: Notched trowel
Maximum application thickness: 5 mm
Application temperatures allowed: From +5°C to +35°C
Open time (EN1346): ≥ 0,5 N/mm2 after 30 minutes
Waiting time for grouting:
Walls: 6 - 8 hours - Floor: 24 hours
Set to light foot traffic: 24 hours
Ready for use: 7 days
Temperature of use: From -30°C to +80°C
How to clean equipment:
With water when product is fresh.
Mechanically when product has hardened.
Consumption: 3.5 mm trowel: 1.8 kg/m2
6 mm trowel: 2.5 kg/m2
8 mm trowel: 3 kg/m2
10 mm trowel: 4 kg/m2
Back-buttering: 5 kg/m2
Storage:
12 months in original packaging in a dry place.
Packaging: 20 kg bags
PRIMOFLEX GREY 25KG
ADHESIVE
PrimoFlex C2 TE S1 is a thixotropic adhesive consisting of high strength ements, graded particle size aggregates, synthetic resins and special additives. It has been formulated and developed for rapid, reliable installation of porcelain tile and ceramic tile on cement based screeds, non-absorbent substrates and onto substrates subject to slight dimensional variation. The high resistance to vertical sliding allows to tile from the top down.
TECHNICAL FEATURES
• High flexibility
• Ideal for exterior application
• Ideal for heated screeds
• Ideal for porcelain stoneware
• Ideal for large sizes
• Application thicknesses up to 15 mm
• Tested to EN 12004, C2 TE S1
• No vertical sliding
Laying of porcelain, single fired ceramic tiles and water stable natural stones on:
• Interior and exterior walls and floors
• Heavy duty areas
• Public and private swimming pools
PRIMOFLEX WHITE 25KG
ADHESIVE
PrimoFlex C2 TE S1 is a thixotropic adhesive consisting of high strength ements, graded particle size aggregates, synthetic resins and special additives. It has been formulated and developed for rapid, reliable installation of porcelain tile and ceramic tile on cement based screeds, non-absorbent substrates and onto substrates subject to slight dimensional variation. The high resistance to vertical sliding allows to tile from the top down.
TECHNICAL FEATURES
• High flexibility
• Ideal for exterior application
• Ideal for heated screeds
• Ideal for porcelain stoneware
• Ideal for large sizes
• Application thicknesses up to 15 mm
• Tested to EN 12004, C2 TE S1
• No vertical sliding
Laying of porcelain, single fired ceramic tiles and water stable natural stones on:
• Interior and exterior walls and floors
• Heavy duty areas
• Public and private swimming pools
STARLIKE EVO SPOTLIGHT 75GR
EPOXY GROUT ADDITIVE
The Galaxy, Spotlight, Gold and Night Vision additives, when mixed as a third component with the Starlike® EVO two- component epoxy grout, give the grouting unique and exclusive effects without compromising the product’s special ease of cleaning.
TECHNICAL FEATURES
SPOTLIGHT
This component can be added to any colour in the Starlike® EVO or FillGood EVO range to obtain a silver glitter effect. The intensity of the original colour will not change.
These additives are sold separately in pre-batched packages for the 1 - 2.5 - 5 kg package of Starlike® EVO.
STARLIKE EVO 5KG
EPOXY GROUT
Two-component acid-resistant epoxy grout for the laying and grouting of ceramic tiles and mosaic
with joints between 1 and 15 mm width. Extremely easy to apply and clean. Suitable for direct
contact with food substances. Product with ultra-low volatile organic compound (VOC) emissions.
Patent Pending.
TECHNICAL FEATURES
Waiting time for grouting:
Floor application:
-with normal-setting adhesive: 24 hours
- with fast-setting adhesive: 6 hours
- with mortar: 7-10 days
Wall application:
- with normal-setting adhesive: 6-8 hours
- with fast-setting adhesive: 6 hours
- with mortar: 2-3 days
Mixing ratios:
Component A: 93.7 parts by weight
Component B: 6.3 parts by weight
The two components are pre-measured in their respective packaging
Mix consistency: thixotropic creamy grout
Specific weight of mix: 1.55 kg/l
Mixture life: About 1 hour at T = +23°C
Application temperatures allowed: From +12°C to +30°C
Recommended application temperature: From +18°C to +23°C
Set to light foot traffic: 24 hours at T = +23°C
Ready for use: 5 days at T = +23°C
Joint width: From 1 to 15 mm
Storage:
24 months in original packaging, avoid freezing temperatures.
Packaging: 1-2.5-5 kg bucket